✅For Consumers: Step-by-Step Guide to Precise Measurement, Effortless and Efficient

Prepare a measuring tape, paper, and pen before measuring. First, measure the length: Measure horizontally from one end of the wall to the other, avoiding baseboards if present, and record the precise value. Next, measure the height: Measure vertically from the ground to the ceiling or ideal installation height, leaving 10-15cm for ventilation. Finally, measure the depth: The distance from the wall to the sofa or other furniture, ensuring the TV cabinet does not obstruct traffic flow; generally, 40-60cm is sufficient. Following these three steps, you can easily choose the right size, effortlessly and efficiently.

✅ For Engineering Clients: Professional Team for On-Site Measurement, Worry-Free Service

For engineering clients, we have a dedicated team composed of senior designers and professional surveyors, providing free on-site precise measurement services. Equipped with high-precision laser surveying equipment, the team conducts a comprehensive survey of the project site, including the living room space, wall structure, and water and electricity points. They not only accurately measure basic dimensions such as length, height, and depth, but also meticulously record key information such as wall materials (e.g., load-bearing walls, lightweight walls), floor flatness, and spatial layout. Within 24 hours of measurement, a professional survey report is issued, including 3D dimension annotations and spatial planning suggestions. From design and customized production to on-site installation, the team provides one-on-one follow-up throughout the entire process, ensuring a seamless fit between the TV cabinet and the project space, allowing you to focus on the overall project progress without worry.

✅After receiving your whole-house customization request, the design team will first combine the precise spatial data obtained from the initial measurements during the consultation, such as the length, height, and depth of each area, as well as details like wall structure and water and electricity points, to create a preliminary design sketch using professional design software.

✅Following this, a dedicated designer will be assigned to you for the initial consultation. During this meeting, the designer will use visual aids such as 3D renderings and material samples to explain in detail the spatial layout logic in the design sketch (e.g., the flow planning between the TV cabinet and sofa, the integration of cabinets with the walls), product dimensional accuracy (cabinet partitions and shelf heights accurate to the millimeter), material selection considerations (environmental protection level of solid wood, wear resistance coefficient of sintered stone), and color schemes (recommended Morandi colors or contrasting color combinations based on your home décor style). Ample time will be allocated to patiently listen to your opinions and ideas, meticulously recording everything from adjustments to the overall style to the style of a single drawer handle.

✅In response to your suggestions, the design team will activate a rapid response mechanism to adjust and optimize the design within 24 hours. For example, we might change open shelving to closed doors to improve storage privacy, or replace the wood lattice texture with one that better suits your aesthetic preferences. Afterwards, we will work closely with you again to confirm each modification detail. This iterative process will continue until you are completely satisfied with every detail of the design, ensuring that the final whole-house customization plan not only fits the actual space but also precisely matches your lifestyle and aesthetic preferences.

✅ Step 1: Panel Cutting:

Adopt a high-precision CNC panel cutting machine with a positioning accuracy of ±0.1mm to cut wood-based panels strictly according to design dimensions. After cutting, use 400-mesh and 800-mesh sandpaper for two rounds of edge sanding, thoroughly removing burrs, wood chips and sharp edges to ensure each edge is smooth and touch-friendly without any rough spots.

✅ Step 2: Laser Edge Banding:

Select environment-friendly PVC edge banding strips, and control the heating temperature at 180-200℃ while maintaining a constant pressure of 0.8MPa during bonding. The laser melting technology realizes seamless integration between the edge banding and panel, achieving a glue-free effect with strong bonding force, no bubbles, no warping and consistent surface texture.

✅ Step 3: Drilling and Installation:

Automated screw machines are used to drill holes and install hinges and slide rails. Screw torque is 1.5-2N・m to prevent loosening and loosening or overtightening and damage.

✅ Step 4: Inspection and Packaging:

First, check the cabinet's appearance (no scratches, no color difference) and hardware (no missing parts, no damage). After passing inspection, double-layer packaging with "thickened cardboard + protective film" is used, with warning labels affixed.

✅ Step 5: Cabinet Assembly:

Assemble the panels and hardware into a complete cabinet. After assembly, check flatness (error ≤1mm) and verticality (error ≤0.5mm) to ensure structural stability.

I. Basic Double-Layer Protection System

✅ Outer Layer Protection: Thickened cardboard (≥3mm thickness) is used, with a tough, tear-resistant, and compression-resistant material that effectively buffers the impact forces during transportation, preventing damage to the outer packaging;

✅ Inner Layer Protection: The entire furniture surface is covered with a PE waterproof protective film, tightly fitted without gaps. This not only isolates dust and prevents moisture intrusion that could cause material deformation, but also prevents friction and scratches on the furniture's paint and surface texture during transportation.

II. Targeted Protective Accessories (Precise Reinforcement Based on Product Type)

✅ Cabinets: Thickened cardboard corner protectors (≥5mm thickness) are pasted on the four corners of the cabinet, focusing on strengthening the impact resistance of these easily damaged areas and preventing dents and cracks;

✅ Countertops (e.g., slab stone, wooden countertops): Multiple layers of bubble wrap are first wrapped around the PE protective film for cushioning and shock absorption, then a custom-made wooden frame (≥15mm thickness) is fitted inside. High-density foam is filled between the countertop and the frame to create a three-dimensional protective space, dispersing pressure during transportation and completely preventing countertop breakage and chipping;

✅ Small Parts: Hinges, screws, handles, and other loose parts are first placed in clearly labeled dedicated boxes for categorized storage, then wrapped with PE protective film and thickened cardboard for double securing to prevent loss, deformation from compression, or scratches to the main product during transportation.

For Individual Consumers：

We offer flexible and convenient installation support for individual consumers, catering to both self-installation needs and professional service options:

✅ Self-Installation: Free high-definition video and text tutorials are provided, clearly outlining the tools, steps, and cabinet fixing precautions, making it easy for beginners to install; online customer service is available to answer installation questions in real time.

✅On-site Installation: Professionally trained technicians can be arranged to provide on-site installation, efficiently completing the entire process; installation fees are transparent and uniform, and you can consult customer service for a quote before placing an order, with no hidden charges, ensuring peace of mind for consumers.

For Purchasing Clients：

For purchasing clients' bulk purchasing and project implementation needs, we provide a "one-stop" dedicated guidance service to facilitate efficient delivery throughout the entire process:

✅Dedicated Support: An experienced account manager will be assigned to provide one-on-one support, offering dedicated service from order confirmation to installation, and responding promptly to your needs.

✅Full-Process Guidance: We provide product installation training, installation team coordination, and on-site technical support to help resolve various installation issues.

✅Customized Support: We optimize installation plans based on specific scenarios such as project decoration and store display, flexibly adjusting service pace to ensure efficient project delivery.

✅ After-sales Response :

Online Response: Customer service provides services  Whatsapp:+86 13794223126 or email (gamashcabinet8888@gmail.com). During working hours (9:00-18:00),inquiries will be answered within 1 hour, and repair requests will be arranged with in 24hours. For any after-sales needs, feel free to contact us.

✅ Exchange Policy:

Returns/Exchanges for Quality Issues: If a product has quality issues (confirmed by the manufacturer), the customer can apply for an exchange within 30 days of receipt, with the manufacturer bearing the shipping costs. Custom-made cabinets (non-standard sizes) are not eligible for return or exchange if there are no quality issues; if there are quality issues, damaged parts can be replaced free of charge or the product can be remanufactured (production cycle approximately 15-20 days).

✅ Value-Added Services:

Cash Rebates, Directly Credited to Your Account: When you successfully refer a new customer to customize a cabinet with us, and the new customer's order is fully paid, you will receive a cash rebate. For details, please consult customer service. Customized service upgrade, enhanced quality! In addition to cash rebates, you can also enjoy customized service upgrade benefits. If you need to customize cabinets again in the future, you can receive a free customized service upgrade project worth up to 500 RMB by successfully referring a new customer.